The AirTAC AirTAC SE100X60S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X60S is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 dimensional standard. It features a 100 mm bore and a 60 mm stroke, generating a substantial 3927 N push force at 0.5 MPa and up to 801 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames while protecting the sealing components.
This specific configuration includes a built-in magnet (indicated by the S code) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors along its three-sided sensor groove. Furthermore, the end caps house field-adjustable pneumatic cushioning screws, allowing technicians to precisely tune end-of-stroke deceleration and minimize mechanical shock during high-speed 30-800 mm/s operations.
| Model | AirTAC SE100X60S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N push force at 0.5 MPa to reliably knock heavy stamped metal panels out of progressive dies within a tight 60 mm stroke.
Harnesses the 30-800 mm/s speed range and adjustable end cushions to snap cardboard box flaps flat before strapping without crushing the corrugated board.
Relies on the smooth ISO 15552 profile body and built-in S magnet to trigger DMSE sensors for precise core positioning during plastic part ejection.
Selecting the SE100X60S is optimal when your mechanism requires heavy actuation within a short 60 mm travel. If 3927 N of push at 0.5 MPa is excessive, stepping down to the 80 mm bore yields a lower 2513 N output. Conversely, if your fixture demands extreme force, the 125 mm bore provides 6136 N. Because this is a standard double-acting cylinder, it cannot hold a load unpowered—air loss or a centered valve will cause drift, requiring a BSE rod lock for safety. The PT1/2 port and M20x1.5 rod thread match standard ISO 15552 hardware, making it a drop-in retrofit. The 60 mm stroke keeps the Ø25 mm rod fully guided, but any future upgrades to 300 mm or longer strokes will require an external guide to prevent rod-bearing bending.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force reaches 5497 N. The maximum push force is 801 kgf when operating at the 1.0 MPa pressure limit.
Yes, the SE100X60S shares the exact ISO 15552 mounting interface and PT1/2 port size, allowing it to serve as a drop-in dimensional replacement for other standard profile cylinders. Its built-in magnet also works directly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.