The AirTAC AirTAC SE100X620S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 620mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X620S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a substantial 3927 N push force at 0.5 MPa, utilizing a 100 mm bore and a 620 mm stroke. The extruded aluminum square barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal seals.
This 620 mm unit is a made-to-order non-standard stroke configuration built on the standard SE platform. It includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic sensors across three dedicated sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s operations.
| Model | AirTAC SE100X620S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 620 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×620 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N push force and 620 mm stroke to index heavy steel body panels between robotic welding stations, relying on the adjustable cushion to soften 800 mm/s end stops.
Actuates a heavy-duty strapping mechanism over a 620 mm travel distance, utilizing the -S magnet and DMSE sensors to verify strap positioning before tensioning.
Drives a large mold ejection carriage with its 3681 N pull force, where the ISO 15552 mounting interface allows a direct drop-in replacement for legacy tooling.
When sizing this 100 mm bore actuator, evaluate your exact force requirements to step up or down effectively. If 3927 N push at 0.5 MPa is excessive, the 80 mm bore offers 2513 N push, saving physical space and air consumption. For heavier loads requiring more thrust, the 125 mm bore provides 6136 N push. Because this 620 mm stroke exceeds the 1500 mm standard maximum, it is manufactured as a non-standard made-to-order unit.
This model features a PT1/2 port, a Ø25 mm piston rod with an M20x1.5 thread, and includes the -S magnet for CMSE/DMSE position sensing. A standard SE cylinder does not hold its load when air pressure is lost or the valve is centered; the piston will drift. For position-holding safety, consider the BSE rod lock variant. Furthermore, at 620 mm, the unsupported stroke length is highly susceptible to rod-bearing bending under side loads; always incorporate an external guide rail to prevent premature seal wear.
Quick checklist
The 100 mm bore generates 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum of 801 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE100X620S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing mounting hardware designed for other ISO 15552 profile cylinders without modifying the footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.