The AirTAC AirTAC SE100X65 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 65mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X65 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. Delivering 3927 N of push force at 0.5 MPa and up to 5497 N at 0.7 MPa, it drives substantial loads with a 65 mm stroke. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy masses at speeds up to 800 mm/s. This specific SKU ships without a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box. It features a PT1/2 port and a Ø25 mm hard-chrome plated carbon steel rod.
| Model | AirTAC SE100X65 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Applies 3927 N of extension force at 0.5 MPa to seat bearings and stamp heavy-gauge sheet metal housings over the 65 mm stroke.
Pushes loaded pallets onto secondary packaging lines, utilizing the 100 mm bore's high thrust to overcome sliding friction.
Secures heavy mold halves in automated plastic injection cells, benefiting from the tie-rod-free extruded profile for flush mounting.
Choosing this 100 mm bore is ideal when 80 mm falls short at 2513 N push, or when the 125 mm bore is excessive at 6136 N push. At 0.5 MPa, the SE100X65 provides 3927 N of extension force and 3681 N of retraction force, hitting a sweet spot for high-thrust pressing and heavy lifting. Because it is a double-acting cylinder, it relies on continuous live air pressure to hold position; if your application must prevent drift during air loss or valve centering, you must integrate an external pilot-operated check valve or step up to an AirTAC BSE rod-lock variant. For retrofitting, its standardized ISO 15552 dimensions ensure drop-in compatibility with other ISO 15552 mounting hardware without altering the existing footprint.
Quick checklist
At 0.5 MPa, the SE100X65 provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, push force increases to 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X65 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing mounts using the same PT1/2 ports and 100 mm bore footprint. Note that this specific SKU lacks a position-sensing magnet, so CMSE or DMSE switches will not function on it without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.