The AirTAC AirTAC SE100X650 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 650mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X650 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a highly compact body that resists corrosion and mounts flush against equipment frames.
This 100 mm bore unit utilizes a PT1/2 port and a Ø25 mm piston rod with an M20x1.5 thread. Because this specific SKU lacks the built-in magnet suffix (-S), it is not wired for CMSE or DMSE position sensing out of the box. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration for heavy 650 mm traverse loads.
| Model | AirTAC SE100X650 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force required to divert heavy timber pallets across a 650 mm travel zone on high-throughput packaging conveyors.
Drives a 650 mm extraction arm to pull cooled plastic automotive interior panels out of injection molding machines safely.
Actuates a 100 mm bore feed mechanism that pushes heavy-gauge steel coils into a hydraulic stamping press.
Selecting this 100 mm bore gives you 3927 N of thrust at 0.5 MPa. If your assembly requires less force, stepping down to an 80 mm bore yields 2513 N push, whereas scaling up to a 125 mm bore provides 6136 N. Keep in mind that a plain SE cylinder will drift and cannot hold a load if air pressure drops; for fail-safe position holding, you would need to specify a BSE rod-lock variant.
With a 650 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads. Even with a sturdy Ø25 mm rod and M20x1.5 thread, you must incorporate an external guide rail to prevent premature rod-bearing wear. As a true ISO 15552 dimension profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, sharing standard mounting accessory dimensions.
Quick checklist
This 100 mm bore cylinder generates 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum of 801 kgf at 1.0 MPa. Its operational speed ranges from 30-800 mm/s.
Yes, the SE100X650 is dimensionally interchangeable per ISO 15552 and shares the same mounting interface as other standard profile cylinders. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.