The AirTAC AirTAC SE100X650S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 650mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X650S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic actuation. It delivers a substantial 3927 N push force at 0.5 MPa (extending to 5497 N at 0.7 MPa) across a 650 mm stroke, utilizing a PT1/2 port and a robust Ø25 mm rod. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 footprint for direct retrofitting.
Equipped with a built-in magnet (-S), this unit seamlessly supports AirTAC CMSE reed and DMSE electronic position sensors along the three integrated sensor grooves. To absorb the high kinetic energy of a 100 mm bore moving at speeds up to 800 mm/s, it features field-adjustable air cushioning at both ends, allowing technicians to fine-tune end-of-stroke deceleration and eliminate hard mechanical impacts.
| Model | AirTAC SE100X650S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force at 0.5 MPa required to hold heavy steel panels firmly in position during robotic spot-welding operations.
Utilizes the 650 mm stroke to index large pallets across a wide conveyor belt, while the -S magnet triggers DMSE sensors for position confirmation.
Leverages the adjustable air cushion to gently fold heavy corrugated carton flaps at high speed without crushing the packaging material.
Selecting this 100 mm bore makes sense when your application demands up to 3927 N of push force at 0.5 MPa. If you need less force, stepping down to the 80 mm bore yields 2513 N push, whereas stepping up to the 125 mm bore provides 6136 N. Because this 650 mm stroke generates significant leverage and side-loading moments on the Ø25 mm rod and its bearing, incorporating an external guide rail is strongly recommended to prevent premature bushing wear and rod bending.
For retrofitting, this cylinder is dimensionally interchangeable per ISO 15552, matching the 100 mm bore, 650 mm stroke, PT1/2 port, and standard mounting interface. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If your process requires absolute position holding without live air pressure, you must integrate an external rod lock or pilot-operated check valve, or explore the BSE variant.
Quick checklist
At 0.5 MPa, the SE100X650S provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.
Yes, it shares the exact ISO 15552 / VDMA 24562 mounting interface, making it a drop-in replacement for other ISO 15552 profile cylinders. The field-adjustable air cushion at both ends lets you turn a screw to regulate exhaust flow, softening the end-stop impact at speed, though it acts only as a decelerator and not a holding brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.