The AirTAC AirTAC SE100X70 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 70mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X70 is a double-acting single-rod profile cylinder delivering a robust 3927 N push at 0.5 MPa. Built to the ISO 15552 standard, it features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This 100 mm bore unit operates at 30-800 mm/s and relies on field-adjustable pneumatic cushioning at both ends to soften end-of-stroke impacts. Because this specific SKU lacks the S magnet code, it is not equipped for CMSE or DMSE position sensing out of the box.
| Model | AirTAC SE100X70 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Supplies the 3927 N push force required to eject heavy plastic parts from a 100 mm bore molding press, utilizing the adjustable cushion to protect the mold face.
Drives a heavy-duty routing gate on a packaging conveyor, where the extruded profile barrel allows flush mounting to the conveyor frame without tie-rod interference.
Positions a hardened stop block on a metal forming line, benefiting from the 36 mm cushion length to decelerate the 25 mm rod smoothly before impact.
When sizing this actuator, compare its 3927 N push at 0.5 MPa against the 63 mm bore offering 1559 N or the larger 125 mm bore delivering 6136 N. As a standard double-acting cylinder, it will drift if air pressure is lost or the valve is centered; applications requiring static load holding during exhaust should integrate an external rod lock or evaluate the BSE variant.
For ISO 15552 dimensional interchangeability, match the 100 mm bore, 70 mm stroke, PT1/2 port, and your required mounting accessory. The 25 mm rod and M20x1.5 thread provide substantial side-load capacity, though any stroke over 300 mm on neighbouring variants would demand an external guide.
Quick checklist
At 0.5 MPa it provides 3927 N push and 3681 N pull. At 0.7 MPa the push is 5497 N. The maximum push is 801 kgf at 1.0 MPa operating pressure.
Yes, it is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same mounting hardware and PT1/2 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.