The AirTAC AirTAC SE100X700 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X700 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 3927 N push force at 0.5 MPa across a 700 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush within tight machine envelopes. The standardized ISO 15552 mounting interface guarantees true dimensional interchangeability for seamless retrofits.
This 100 mm bore unit features a 25 mm piston rod and a PT1/2 port. Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s cycles. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE electronic position sensing without modification.
| Model | AirTAC SE100X700 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leverages the 3927 N push force to deflect heavy timber pallets onto secondary packaging lines without stalling.
Uses the 700 mm stroke to safely extract deep-cavity automotive interior panels from molding presses.
Employs the 801 kgf maximum thrust to push dense totes within automated storage and retrieval system shuttle lanes.
Select this 100 mm bore when an application requires the 3927 N push force at 0.5 MPa (801 kgf maximum at 1.0 MPa). If you need less force, the 80 mm bore offers 2513 N push, while stepping up to the 125 mm bore yields 6136 N push. Because this is a standard 700 mm stroke, it falls within the 100 mm bore's maximum standard stroke limit of 1500 mm. However, at 700 mm of unsupported length, the 25 mm rod is susceptible to bending under side loads; always incorporate an external linear guide to prevent premature rod-bearing wear. Remember that the adjustable air cushion only decelerates the piston near stroke end and will not hold a load if air pressure is lost.
Quick checklist
At 0.5 MPa, the SE100X700 provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force is 5497 N. The maximum allowable push force is 801 kgf at 1.0 MPa.
Yes. The SE100X700 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. It shares standard mounting interface dimensions and uses a PT1/2 port, allowing for seamless retrofits without altering existing mounting plates.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.