The AirTAC AirTAC SE100X700FTC ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X700FTC is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates 3927 N of push force and 3681 N of pull force, scaling up to a maximum push of 801 kgf at 1.0 MPa. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machine frames while protecting the bore from physical damage.
This 100 mm bore unit features a 700 mm stroke, a PT1/2 port, and a Ø25 mm piston rod with an M20x1.5 thread. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, preventing hard impacts during high-speed 30-800 mm/s operations. Configured with an FTC mounting accessory, it is built for rigid front-trunnion installations without a built-in position sensing magnet.
| Model | AirTAC SE100X700FTC ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force required to compress and stack heavy corrugated cardboard pallets, utilizing the 700 mm stroke to reach lower tier heights securely.
Drives large automotive interior panels out of molding presses, using the adjustable air cushion to soften the 700 mm extraction deceleration at high speeds.
Pushes heavy-gauge steel sheets into a press brake, where the rigid FTC trunnion mount and 801 kgf max push force ensure positive material placement.
Generating 3927 N push at 0.5 MPa, this 100 mm bore actuator sits just below the 125 mm class (6136 N push) and well above the 80 mm class (2513 N push), allowing you to step up or down depending on your load requirements. Because this SKU lacks a built-in magnet, position sensing is not available; if you need end-of-stroke feedback, select an SE100X700S variant. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 actuators, sharing standardized mounting hardware like the FTC front trunnion.
At 700 mm, the unsupported stroke length places significant bending loads on the Ø25 mm rod and front bearing. To prevent premature seal wear and rod deflection, always pair this cylinder with an external guide or linear rail to support the load laterally.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the SE100X700FTC is a standard double-acting cylinder and the adjustable air cushions only decelerate the piston near stroke end; they are not brakes. If air is lost or the valve is centered, the piston will drift. For position holding, use a BSE rod lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.