The AirTAC AirTAC SE100X750 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 750mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X750 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates a substantial 3927 N of push force and 3681 N of pull force, scaling up to 5497 N push at 0.7 MPa. The extruded aluminum barrel design omits external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 100mm bore unit features a 25mm piston rod and a PT1/2 port. Because this specific SKU lacks the -S magnet suffix, it is prepared for mechanical actuation without electronic position sensing. Field-adjustable air cushions at both stroke ends allow technicians to tune deceleration via a set screw, softening hard end stops when moving heavy payloads at speeds up to 800 mm/s.
| Model | AirTAC SE100X750 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force at 0.5 MPa required to hold heavy steel body panels firmly in position during robotic spot-welding operations.
Utilizes the 750mm stroke to push loaded pallets smoothly across transfer lines, with adjustable cushions absorbing the kinetic energy of heavy masses.
Deploys the long 750mm extension to pull and form large corrugated cartons, relying on the 3681 N retract force to square heavy packaging materials.
Selecting this 100mm bore involves sizing against its neighbors: if 3927 N push at 0.5 MPa is excessive, the 80mm bore offers 2513 N; if the application demands more power, the 125mm bore provides 6136 N. As a standard ISO 15552 profile cylinder, the SE100X750 serves as a drop-in replacement for any ISO 15552 cylinder, matching footprint and mounting hardware. To add position detection, specify the -S option for CMSE reed or DMSE electronic sensors.
With a 750mm stroke, the 25mm rod experiences significant bending moments under side loads. An external guide mechanism is strongly recommended to prevent rod-bearing wear and preserve seal integrity. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load. If air pressure is lost, the cylinder drifts, so a BSE rod lock variant is required for secure positioning.
Quick checklist
At 0.5 MPa, the SE100X750 delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf when operating at the 1.0 MPa pressure limit.
No, the standard SE cylinder drifts when air is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the end of the stroke and does not function as a brake. For load holding, consider the BSE rod lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.