The AirTAC AirTAC SE100X750S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 750mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X750SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It generates 3927 N of push force and 3681 N of pull force at 0.5 MPa, peaking at 801 kgf under 1.0 MPa. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush while keeping the standardized ISO 15552 footprint for seamless retrofitting.
This 100 mm bore unit integrates a built-in magnet for non-intrusive position sensing via AirTAC CMSE reed or DMSE electronic switches along its three-sided sensor grooves. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s traversal across the 750 mm stroke.
| Model | AirTAC SE100X750S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives heavy mold ejection plates over the full 750 mm span, utilizing 3927 N of thrust at 0.5 MPa to reliably strip large automotive plastic components from tooling.
Actuates a heavy-duty diverter arm on high-throughput packaging lines, relying on the adjustable end cushions to soften stops at high speeds without fixed bumpers.
Provides steady downward clamping force in secondary assembly presses, taking advantage of the 801 kgf maximum capacity and FTC trunnion mount for pivoting leverage.
Choosing this 100 mm bore makes sense when your application demands substantial thrust, offering 3927 N push at 0.5 MPa. If you need less force and a smaller footprint, step down to the 80 mm bore providing 2513 N push; conversely, scale up to the 125 mm bore for 6136 N push if your load requires maximum power. Remember that a plain SE cylinder will drift and cannot hold a load if air pressure drops or the valve centers—use a BSE rod lock for secure positioning.
This configuration includes an FTC center trunnion mounting bracket and a PT1/2 port. Because the 750 mm stroke is substantial, the Ø25 mm rod and thread experience bending moments under side loads; always support the mechanism with an external guide rail to prevent rod-bearing wear.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force reaches 5497 N. The absolute maximum push force is 801 kgf when operating at the 1.0 MPa pressure limit.
Yes, the built-in -S magnet allows direct mounting of AirTAC CMSE reed and DMSE electronic sensors in the barrel grooves. Furthermore, its dimensions strictly adhere to the ISO 15552 standard, making it a drop-in replacement for any ISO 15552 profile cylinder without requiring custom mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.