The AirTAC AirTAC SE100X75S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 75mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X75S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 3927 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush into tight machine frames while resisting mechanical snags.
Equipped with a built-in S magnet, this unit seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in deceleration via a set screw, softening hard end stops during high-speed actuation without acting as a position lock.
| Model | AirTAC SE100X75S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 3927 N of secure clamping force at 0.5 MPa to hold heavy steel castings firmly in place during high-speed CNC machining operations.
Utilizes the 75mm stroke to index empty pallets into heavy-duty packaging lines, absorbing kinetic energy via its adjustable end cushions.
Exerts up to 801 kgf at 1.0 MPa to knock stamped metal parts out of press dies, using the built-in magnet to confirm ejection.
Selecting this 100mm bore provides 3927 N push at 0.5 MPa, fitting neatly between the 63mm bore (1559 N push) for lighter loads and the 125mm bore (6136 N push) for maximum heavy-duty thrust. Because it is a double-acting cylinder, the SE100X75S relies on continuous air pressure to maintain its position and will drift if supply is lost; for load-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve. As a dimensionally interchangeable ISO 15552 component, it serves as a drop-in replacement sharing the PT1/2 port, 75mm stroke, and standard mounting accessories.
Quick checklist
At 0.5 MPa, the SE100X75S generates 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force is 5497 N, with a maximum push rating of 801 kgf at 1.0 MPa. It features a 100mm bore, a PT1/2 port, and a Ø25mm rod with an M20x1.5 thread.
Yes, the SE100X75S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and body dimensions as other ISO 15552 profile cylinders. You can swap it directly using your existing mounting hardware and PT1/2 pneumatic connections.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.