The AirTAC AirTAC SE100X800FTC ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X800FTC is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a substantial 3927 N push at 0.5 MPa, utilizing a 100mm bore and an 800mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 footprint.
This configuration uses an FTC center-trunnion mounting accessory to handle articulated loads and features a PT1/2 port paired with a 25mm piston rod. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, softening hard impacts when moving heavy masses at speed. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensing without modification.
| Model | AirTAC SE100X800FTC ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives heavy mold platens along an 800mm stroke, utilizing the 3927 N push force to shift steel tooling into the clamping area with precise FTC articulation.
Actuates lower-tier forming presses for vehicle body panels, where the 100mm bore output and adjustable cushions absorb the kinetic energy of rapid press cycles.
Propels a heavy-duty pallet transfer carriage 800mm between machining centers, relying on the robust 25mm rod to maintain structural integrity under high inertia.
Selecting this 100mm bore cylinder makes sense when your application requires the 3927 N push at 0.5 MPa or up to 801 kgf at 1.0 MPa. If you need slightly less force, the 80mm bore provides 2513 N of push, while stepping up to the 125mm bore yields 6136 N. Because this unit features an 800mm stroke, the extended 25mm rod generates significant bending moments under side loads; always pair it with an external guide rail to prevent rod-bearing wear. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other 100mm bore, 800mm stroke cylinders using existing FTC mounting hardware.
Keep in mind the adjustable air cushion only decelerates the piston near stroke end and does not hold the load. If air pressure drops or the valve centers, the cylinder will drift, so add a BSE rod lock or external pilot-operated check valve for fail-safe positioning.
Quick checklist
This 100mm bore cylinder delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the extruded profile barrel is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing FTC mounting hardware. However, this specific SKU does not include a built-in magnet, so it cannot host CMSE or DMSE electronic or reed position sensors without factory modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.