The AirTAC AirTAC SE100X800SH ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X800SH is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. It delivers a substantial 3927 N push at 0.5 MPa, utilizing a 100 mm bore and an 800 mm stroke to move large masses across long distances. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining a standardized ISO 15552 footprint.
Configured with an S magnet for CMSE and DMSE position sensing, this unit tracks piston travel precisely along its 800 mm path. The H seal designation equips the cylinder with FKM Viton elastomers, widening the operating temperature range from -20 to +150 C for high-heat environments. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration via a set screw, protecting the 25 mm rod and payload from harsh mechanical impacts.
| Model | AirTAC SE100X800SH ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Positions heavy welding fixtures along an 800 mm travel path, using 3927 N of thrust to hold steel panels while the FKM seals withstand ambient radiant heat from nearby torches.
Stages large corrugated cartons at the end of a packaging line, relying on the 100 mm bore's 5497 N push at 0.7 MPa to overcome sliding friction across an 800 mm extension.
Strips cured plastic parts from heated molds, where the Viton FKM seals survive continuous 150 C ambient temperatures and the CMSE sensors confirm full ejection stroke.
Selecting this 100 mm bore provides 3927 N of push force at 0.5 MPa. If your application is over-specified, stepping down to the 80 mm bore drops the output to 2513 N, whereas moving up to the 125 mm bore increases it to 6136 N. Because this model features an 800 mm stroke, the extended 25 mm rod generates significant leverage; an external guide is strongly recommended to prevent rod-bearing bending under heavy side loads.
As a standard ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders, sharing identical mounting and PT1/2 port dimensions. Remember that the adjustable air cushion only decelerates the piston near stroke end and does not function as a brake; if air pressure is lost, the cylinder will drift, so a BSE rod lock or external pilot-operated check valve is required for fail-safe load holding.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N, and the maximum push capacity is 801 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE100X800SH is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing setups using the same PT1/2 ports and mounting hardware, though you must confirm that your rod-end M20x1.5 thread matches your existing mechanical linkage.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.