The AirTAC AirTAC SE100X80S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 80mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X80S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It generates 3927 N of push force at 0.5 MPa and utilizes a Ø25 mm piston rod with an M20x1.5 thread. Because the unit carries the -S option, it contains a built-in magnet designed to interface directly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection.
This actuator features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard mechanical stops when cycling at speeds up to 800 mm/s.
| Model | AirTAC SE100X80S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
With 3927 N of thrust at 0.5 MPa, this 100 mm bore cylinder actuates heavy cardboard flap folding arms on high-speed end-of-line palletizers, using its 80 mm stroke for rapid folding cycles.
The 3681 N retract force is ideal for kicking stamped metal panels out of a 150-ton mechanical press, where the compact profile barrel and M20x1.5 rod withstand high-impact repetitive side loads.
Providing reliable clamping and separation for heavy injection molding halve molds, the built-in magnet enables DMSE sensors to confirm mold closure before the plastic injection sequence begins.
If your application requires less force, stepping down to the 80 mm bore yields 2513 N of push at 0.5 MPa, while stepping up to the 125 mm bore provides 6136 N for heavier loads. As an ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, ensuring a drop-in retrofit using standardized mounting accessories. Note that the adjustable air cushion only decelerates the piston near the stroke end; it does not hold a load. If the machine loses air pressure, the rod will drift, requiring a BSE rod lock for static holding.
Quick checklist
The SE100X80S generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes. The SE100X80S is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. You can swap it directly using your existing mounting hardware and PT1/2 port connections without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.