The AirTAC AirTAC SE100X85 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 85mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X85 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a substantial 3927 N push force at 0.5 MPa and reaches a maximum thrust of 801 kgf at 1.0 MPa, making it highly capable of driving high-inertia loads. The 85 mm stroke provides precise motion for compact, high-force tasks.
This unit features a square extruded aluminum barrel without external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops for fast-cycling machinery. Because this specific SKU lacks the -S magnet suffix, it does not support AirTAC CMSE or DMSE electronic position sensing without modification.
| Model | AirTAC SE100X85 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Loads heavy stamping blanks into hydraulic presses using the 3927 N push force to reliably shift dense steel plates through the 85 mm travel.
Ejects dense plastic automotive interior panels from moulding tools, leveraging the 801 kgf max thrust to break vacuum suction during fast cycling.
Drives heavy cutting heads through structural timber, where the adjustable end cushions absorb the high kinetic energy of the 100 mm piston at stroke limits.
Selecting this 100 mm bore is ideal when your application requires up to 3927 N of push force at 0.5 MPa. If you need slightly less power, stepping down to the 80 mm bore yields 2513 N, whereas moving up to the 125 mm bore provides 6136 N for the heaviest lifts. As a true ISO 15552 cylinder, it offers a drop-in replacement footprint for standardized mounting hardware like FA front flanges or TC centre trunnions.
Since this model uses a PT1/2 port and an M20x1.5 rod thread, ensure your plumbing and rod-end joints match these specifications. Note that a plain SE cylinder does not hold its position when air pressure is lost or the valve is centered; the piston will drift. If your workflow demands fail-safe load holding, consider the BSE variant with an integrated rod lock.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force is 5497 N, with a maximum push of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE100X85 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 100 mm bore, 85 mm stroke, and PT1/2 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.