The AirTAC AirTAC SE100X850S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 850mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X850S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It generates a substantial 3927 N push force at 0.5 MPa, scaling up to 5497 N at 0.7 MPa, making it well-suited for high-thrust automated machinery. The 850 mm stroke is a non-standard made-to-order length, providing extended travel for specialized material handling.
This model features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Equipped with a built-in magnet (-S), it supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable air cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard impacts at the end of the 850 mm travel.
| Model | AirTAC SE100X850S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 5497 N push force at 0.7 MPa to shove heavy loaded pallets off a high-speed main conveyor line onto a reject spur over the full 850 mm stroke.
Deploys the 3927 N extend force to push stamped metal parts clear of a hydraulic press bed, relying on the DMSE electronic sensor to confirm ejection.
Actuates a heavy forming platen across the 850 mm travel to fold and seal oversized corrugated cartons, tuned via the adjustable air cushion to prevent platen bounce.
Selecting the SE100X850S is appropriate when your application requires massive thrust over a long 850 mm stroke. If you need to step the force down, the neighboring 80 mm bore provides 2513 N push at 0.5 MPa. Stepping up is not an option as 100 mm is near the top of this series, though the 125 mm bore offers 6136 N push if even greater power is required. Because this stroke exceeds the 100 mm bore's 800 mm standard maximum, it is manufactured as a non-standard made-to-order unit.
With an 850 mm stroke, the 25 mm rod and internal bearing face significant bending moments under side loads; an external guide rail is strongly recommended to prevent premature seal wear. The PT1/2 port handles the necessary air volume for the 30-800 mm/s speed range. Note that the adjustable cushion decelerates the piston near stroke end but does not lock the load; if air pressure drops, the rod will drift, requiring a BSE rod lock for secure holding.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push capacity is 801 kgf at 1.0 MPa. The 850 mm stroke on this unit is non-standard and made-to-order, as the standard maximum stroke for this bore is 800 mm.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders using standard mounting accessories. However, it does not hold its position if air pressure is lost; the adjustable air cushion only decelerates the piston near stroke end and is not a locking mechanism. For load holding, consider the BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.