The AirTAC AirTAC SE100X85S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 85mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X85S is a double-acting single-rod profile cylinder delivering a robust 3927 N push at 0.5 MPa. Built to the ISO 15552 standard, its square extruded aluminum barrel omits external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
This 100mm bore unit includes a built-in magnet (-S) for non-contact position sensing via AirTAC CMSE reed or DMSE electronic switches. Field-adjustable air cushioning at both ends allows mechanics to tune end-of-stroke deceleration, absorbing kinetic energy smoothly rather than relying on a fixed bumper.
| Model | AirTAC SE100X85S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force required to clamp and hold heavy sheet metal dies in position during high-tonnage press brake forming operations.
Uses the 85mm stroke and DMSE electronic sensor feedback to eject dense plastic automotive interior panels from injection molding fixtures.
Secures heavy machining pallets on horizontal CNC mills, utilizing the adjustable cushion to soften the 100mm bore impact at end of stroke.
Selecting this 100mm bore provides 3927 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 80mm bore yields 2513 N; conversely, scaling up to the 125mm bore provides 6136 N. Because the 85mm stroke is under 300mm, side-loading on the M20x1.5 rod thread is minimal, though external guides remain best practice for heavy radial loads.
As a standard ISO 15552 cylinder, the SE100X85S serves as a drop-in replacement for other 100mm profile cylinders, matching the exact mounting interface and PT1/2 port. Note that a plain double-acting cylinder drifts when air pressure is lost; if the machine must hold a vertical load safely during an exhaust or power failure, integrate an external rod lock like the BSE series or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa.
Yes, the SE100X85S is dimensionally interchangeable per ISO 15552. It shares the standardized mounting footprint and PT1/2 port size, allowing it to serve as a direct drop-in replacement for other 100mm bore ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.