The AirTAC AirTAC SE100X90 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 90mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X90 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a substantial 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while surviving high side-load impacts.
This 100 mm bore unit features a 25 mm hard-chrome piston rod and PT1/2 ports. Because this specific SKU lacks the -S magnet suffix, it arrives without built-in position sensing; you would specify an SE100X90S if your PLC requires CMSE reed or DMSE electronic switch feedback. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, preventing harsh mechanical banging during high-speed 90 mm strokes.
| Model | AirTAC SE100X90 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the robust 3927 N push at 0.5 MPa required to break loose stubborn injection-molded plastic parts from heavy steel tooling during automated demolding cycles.
Uses the 90 mm stroke to kick heavy loaded pallets from a main roller conveyor onto a secondary packaging line, absorbing the lateral impact via its rigid 25 mm rod.
Delivers rapid 30-800 mm/s retraction to eject stamped sheet metal blanks from progressive dies, relying on adjustable cushioning to soften the end stop.
Selecting this 100 mm bore provides 3927 N of push at 0.5 MPa. If your application is over-specified and you need less force, stepping down to the 80 mm bore yields 2513 N. Conversely, if you need to move heavier jigs, the 125 mm bore provides 6136 N. Keep in mind the plain SE design cannot hold a load if air pressure drops or the valve centers; the piston will drift, so specify a BSE rod-lock variant for fail-safe vertical holding.
As a true ISO 15552 profile cylinder, the SE100X90 is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing FA front flanges or LB foot mounts without redesigning the footprint. The 90 mm stroke is well below the 1500 mm maximum standard stroke, keeping the 25 mm rod highly rigid without requiring external guide rails to prevent rod-bearing bending.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder outputs 3927 N of push and 3681 N of pull. At 0.7 MPa, the push increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE100X90 is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting interface and footprint as other standard profile cylinders. You can reuse your existing mounting accessories and PT1/2 port plumbing without altering the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.