The AirTAC AirTAC SE100X900S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 900mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X900S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 3927 N push force at 0.5 MPa, leveraging a 100 mm bore and a 900 mm stroke to move substantial loads. The extruded aluminum barrel design omits external tie rods entirely, yielding a smoother, more compact body that resists corrosion and mounts flush against machine frames.
This 900 mm travel unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. To protect the end caps over such a long travel distance, the cylinder relies on field-adjustable pneumatic cushioning at both ends, allowing technicians to fine-tune the deceleration screws and soften hard end stops at high cycle speeds.
| Model | AirTAC SE100X900S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N push at 0.5 MPa to index heavy loaded pallets between machining centers, relying on the 900 mm stroke to bridge wide conveyor gaps.
Deploys the 900 mm travel to pull and fold large corrugated cardboard blanks, utilizing the smooth no-tie-rod profile to prevent packaging snags.
Lifts heavy manufacturing skids with the 801 kgf maximum capacity, using DMSE electronic sensors to confirm full extension at high speeds.
Selecting the SE100X900S provides 3927 N of push force at 0.5 MPa, striking a balance for heavy material handling. If your application requires less force, the 80 mm bore offers 2513 N push, while stepping up to the 125 mm bore yields 6136 N for heavier payloads. Because this model features a 900 mm stroke, the 25 mm rod and thread experience significant side-load bending moments; for any unsupported mass over 300 mm of travel, an external guide is strongly recommended to prevent premature rod-bearing wear.
As a standard ISO 15552 cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 profile cylinders, sharing standard mounting hardware. Remember that this is a double-acting air cylinder: the adjustable cushion only decelerates the piston near the stroke end and does not lock or hold the load if air pressure is lost. For position holding without live pressure, consider the BSE rod lock variant.
Quick checklist
The SE100X900S provides a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing the exact same mounting interface and PT1/2 port. The pneumatic cushions at both ends are field-adjustable via a screw, letting you tune the end-of-stroke deceleration to match your moving mass and speed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.