The AirTAC AirTAC SE100X90S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 90mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X90S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a substantial 3927 N push force at 0.5 MPa and utilizes a PT1/2 port paired with a 25 mm hard-chrome rod. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting debris buildup.
Because this unit includes the -S option, it carries a built-in magnet for non-contact position sensing with AirTAC CMSE reed or DMSE electronic switches. Field-adjustable air cushions at both ends allow you to fine-tune end-of-stroke deceleration, softening hard impacts when moving heavy loads at high speeds. It operates reliably between 0.15-1.0 MPa and offers a maximum speed of 800 mm/s.
| Model | AirTAC SE100X90S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Generates 3927 N of thrust at 0.5 MPa to lock heavy cast iron engine blocks securely in place during high-speed CNC milling operations.
Uses the 90 mm stroke and adjustable end cushions to smoothly fold large corrugated cardboard box flaps at line speeds up to 800 mm/s.
Provides robust 3681 N retract force to pull heavy plastic injection molded automotive dashboards off the core, utilizing the 25 mm rod for high side-load resistance.
When sizing this 100 mm bore actuator, evaluate your exact force margins: the SE100X90S provides 3927 N push at 0.5 MPa. If your load is lighter, stepping down to the 80 mm bore yields 2513 N push, saving space and air consumption. If you need more thrust, the 125 mm bore provides 6136 N push. Remember that a plain SE cylinder cannot hold a load if air pressure drops or the valve centers; the piston will drift. For position-holding safety, consider the BSE rod-lock variant. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, making it a drop-in retrofit for existing setups using the same FA or LB mounting accessories and PT1/2 ports.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N push and 3681 N pull. At 0.7 MPa, the push force is 5497 N. The maximum thrust is 801 kgf at 1.0 MPa, with a speed range of 30-800 mm/s.
Yes. The SE100X90S is built to the ISO 15552 / VDMA 24562 dimensional standard, meaning it is a drop-in replacement for any ISO 15552 profile cylinder with matching 100 mm bore and 90 mm stroke specifications, utilizing standard mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.