The AirTAC AirTAC SE100X950 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X950 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating on filtered air, it generates 3927 N of push force and 3681 N of pull force at 0.5 MPa, peaking at a maximum push of 801 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 950 mm stroke unit features a Ø25 mm piston rod with an M20x1.5 thread, utilizing a PT1/2 port. Because this SKU lacks the -S magnet option, it is not equipped for CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-velocity 30-800 mm/s traverses.
| Model | AirTAC SE100X950 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushing filled corrugated cases onto a palletizer conveyor, utilizing the 3927 N push force to overcome box friction and clear the 950 mm stroke path reliably.
Ejecting formed sheet metal parts from a CNC press brake, where the adjustable cushion absorbs the kinetic energy of the heavy tooling returning at speed over a long stroke.
Actuating a diverting arm on a heavy-duty roller conveyor to lane split 1000 kg pallets, benefiting from the no-tie-rod extruded profile for tight lateral mounting clearances.
Stepping down to the 80 mm bore yields 2513 N of push at 0.5 MPa, while stepping up to the 125 mm bore increases that to 6136 N, letting you match the load precisely. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement sharing standardized mounting interfaces. Note that at 950 mm of unsupported stroke, the bending moment on the rod bearing escalates; incorporating an external guide rail prevents side-load wear. Furthermore, if the application requires holding a load vertically without constant air pressure, this base SE cylinder will drift, and a BSE rod lock variant is necessary.
Quick checklist
At 0.5 MPa, the SE100X950 delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, push force reaches 5497 N, with an absolute maximum push of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X950 is dimensionally interchangeable per ISO 15552 standards. It shares the exact same mounting footprint and accessory interface as other ISO 15552 profile cylinders, allowing for a direct drop-in retrofit without altering the machine's mounting plate.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.