The AirTAC AirTAC SE100X95S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 95mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X95S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard impacts at high cycling speeds.
| Model | AirTAC SE100X95S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the heavy 3927 N push force required to secure injection mold halves during material injection, ensuring precise parting line alignment.
Actuates heavy diverting arms on packaging conveyors, utilizing the 95mm stroke to push loaded pallets onto secondary routing lanes reliably.
Drives raw billets into the staging area of a hydraulic press, where the 25mm rod handles the lateral stresses of feeding dense metal stock.
Selecting the SE100X95S provides 3927 N of push at 0.5 MPa, striking a balance between mid-range and heavy-duty actuation. If your application requires less force, stepping down to the 80mm bore yields 2513 N of push; conversely, scaling up to the 125mm bore provides 6136 N for higher load demands. This cylinder uses a PT1/2 port and a 25mm rod.
As a standard ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, sharing identical mounting interface dimensions and accessory compatibility. Note that the adjustable air cushion only decelerates the piston near stroke end and does not function as a lock; if your process must hold a vertical load without live air pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
The SE100X95S generates a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The cylinder features a PT1/2 port and operates at speeds between 30-800 mm/s.
Yes, the SE100X95S includes a built-in magnetic ring (-S) designed to work seamlessly with AirTAC CMSE reed switches and DMSE electronic solid-state sensors, which mount directly into the sensor grooves on the extruded barrel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.