Airtac SE125 Standard Cylinder SE125X95
The AirTAC Airtac SE125 Standard Cylinder SE125X95 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø125mm bore and 95mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ125 mm
- Stroke95 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
About the Airtac SE125 Standard Cylinder SE125X95
The AirTAC SE125X95 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a substantial 6136 N push force at 0.5 MPa. Its clean extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
This specific SKU features a non-standard 95 mm stroke (made-to-order) and lacks a built-in magnet, meaning it ships without position sensing out of the box. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, protecting the 32 mm rod from mechanical shock during heavy loads.
Airtac SE125 Standard Cylinder SE125X95 Technical Specifications
| Model | Airtac SE125 Standard Cylinder SE125X95 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE125 Standard Cylinder SE125X95
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 125 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE125 Standard Cylinder SE125X95 Is Used
Injection Mold Clamping
Provides the heavy 8590 N push force at 0.7 MPa required to secure large injection molding halts during the material injection phase.
Pallet Stopper Arms
Acts as a robust physical stop barrier on heavy-duty conveyor lines, utilizing the 125 mm bore capacity to halt loaded pallets safely.
Stamping Press Feed
Drives the heavy material feeding mechanism into a hydraulic stamping press, relying on the 40 mm cushion length to absorb massive kinetic energy.
Is the Airtac SE125 Standard Cylinder SE125X95 the Right Cylinder?
Selecting this 125 mm bore actuator provides a maximum thrust of 1252 kgf at 1.0 MPa. If you need slightly less force, the neighboring 100 mm bore yields 3927 N push at 0.5 MPa; stepping up is not possible as 125 mm is the largest standard SE size. Because this is a custom 95 mm stroke, confirm lead times during your RFQ.
As a double-acting cylinder, the SE125X95 relies on continuous air pressure to maintain its load. If air is lost or the valve centers, the piston will drift. For applications requiring strict position holding without live pressure, consider the BSE variant with an integrated rod lock. This model is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing PT1/2 port plumbing and mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE125 Standard Cylinder SE125X95 FAQ
At 0.5 MPa, this 125 mm bore cylinder outputs 6136 N push and 5734 N pull. At 0.7 MPa, the push increases to 8590 N. The maximum push capacity is 1252 kgf at 1.0 MPa. Operating speed ranges from 30-500 mm/s.
Yes. The SE125X95 is dimensionally interchangeable per ISO 15552 standards. You can swap it directly into existing hardware using the standard mounting interface and PT1/2 port threads without altering the machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE125 Standard Cylinder SE125X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.