Airtac SE32 Standard Cylinder SE32BX700SH
The AirTAC Airtac SE32 Standard Cylinder SE32BX700SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke700 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX700SH
The AirTAC SE32BX700SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding, high-temperature washdown environments. Equipped with a SUS304 stainless steel rod and FKM Viton seals, it operates reliably up to 150°C while delivering 402 N of push force at 0.5 MPa. Its 700 mm stroke is a made-to-order non-standard length, expanding the reach of the compact 32 mm bore frame.
Built on an extruded aluminum barrel without external tie rods, this cylinder offers a flush, corrosion-resistant profile that simplifies mounting and cleaning. The integrated magnet (-S) supports CMSE reed and DMSE electronic position sensing, while field-adjustable air cushions at both ends allow you to fine-tune end-of-stroke deceleration for fast cycling.
Airtac SE32 Standard Cylinder SE32BX700SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX700SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX700SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX700SH Is Used
Bakery Oven Door Actuation
Utilizes the 700 mm stroke to fully open high-temperature oven doors, leveraging the FKM Viton seal rated to 150°C and SUS304 rod to withstand thermal cycling and washdown.
PCB Conveyor Diverter
Pushes lightweight electronic panels across a transfer line with 402 N of force at 0.5 MPa, using the integrated magnet with DMSE sensors for precise end-position verification.
Lab Sample Ejection
Ejects processed samples from a 700 mm deep testing chamber, relying on the SUS304 stainless rod for corrosion resistance against aggressive chemical sterilization.
Is the Airtac SE32 Standard Cylinder SE32BX700SH the Right Cylinder?
Selecting the SE32BX700SH makes sense when a long 700 mm reach is required but the payload is light, as the 32 mm bore yields 402 N push at 0.5 MPa. If your application demands more force, stepping up to the 40 mm bore provides 628 N of push at 0.5 MPa. Conversely, if you need to minimize footprint and can accept lower output, the 32 mm is the smallest standard ISO 15552 bore available. Because the 700 mm stroke is non-standard, expect a made-to-order lead time. At 700 mm of unsupported stroke, the 12 mm rod is highly susceptible to side-load bending; an external guide mechanism is required to prevent rod-bearing damage.
As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, matching the exact mounting interface, PT1/8 port, and M10x1.25 rod thread. Note that the adjustable air cushion only decelerates the piston near stroke end—it is not a locking mechanism. If the machine loses air pressure, the cylinder will drift; for static load holding, consider the AirTAC BSE rod lock series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX700SH FAQ
The SE32BX700SH provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
No, the adjustable air cushion only decelerates the piston near the stroke end; it is not a brake or lock. If air is exhausted, the load will drift. For position holding without live pressure, use the AirTAC BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX700SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.