Airtac SE32 Standard Cylinder SE32BX80
The AirTAC Airtac SE32 Standard Cylinder SE32BX80 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX80
The AirTAC SE32BX80 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation, delivering a 402 N push at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames to save valuable space.
This specific SKU features a SUS304 stainless steel rod (code B) for superior resistance in washdown or mildly corrosive settings. It operates at 30-800 mm/s and utilizes a PT1/8 port. Note that this configuration ships without a sensor magnet, so position detection via CMSE or DMSE switches is not supported on this unit.
Airtac SE32 Standard Cylinder SE32BX80 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX80 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX80
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX80 Is Used
Lab Diagnostic Ejector
Pushes tested vials out of a centrifuge carousel using a corrosion-resistant SUS304 rod, safely delivering 402 N of force over an 80 mm stroke.
Food Pouch Flap Folder
Folds the top flaps of small food packaging cartons on a washdown line, where the stainless rod endures frequent cleaning cycles.
PCB Clamp Actuator
Actuates a light-duty clamping arm to hold circuit boards during routing, utilizing the smooth tie-rod-free profile for tight cell integration.
Is the Airtac SE32 Standard Cylinder SE32BX80 the Right Cylinder?
Selecting the SE32BX80 is ideal when your application requires the 402 N push of a 32 mm bore but demands a stainless rod for damp environments. If you need less force, stepping down is not an option as 32 mm is the smallest standard size. If your load requires more power, step up to the 40 mm bore, which provides a 628 N push at 0.5 MPa. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve is centered; for position holding, consider a BSE rod lock variant. Being dimensionally interchangeable per ISO 15552, it serves as a drop-in replacement for other ISO 15552 profile cylinders using standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX80 FAQ
The SE32BX80 provides a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa. This 32 mm bore cylinder uses a PT1/8 port.
This specific SKU does not include a built-in magnet, so it cannot support CMSE or DMSE electronic position sensors. However, it does feature field-adjustable air cushioning at both ends, allowing you to tune the deceleration of the 80 mm stroke via a set screw to soften end-stop impacts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.