Airtac SE32 Standard Cylinder SE32X130S
The AirTAC Airtac SE32 Standard Cylinder SE32X130S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke130 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X130S
The AirTAC SE32X130S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 402 N push force at 0.5 MPa, utilizing a 12 mm hard-chrome piston rod and a PT1/8 port. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine envelopes.
Because this unit includes the -S magnet code, it is fully primed for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches seated in the body's integral sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, preventing harsh impact when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X130S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X130S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X130S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X130S Is Used
PCB Router Gantry
Drives the Z-axis plunge on a small-batch PCB depaneling router, using the 130 mm stroke to clear the cutting bed and 402 N thrust to maintain spindle rigidity.
Blister Pack Sealer
Actuates the upper heat platen on a medical blister packaging line, where the compact tie-rod-free profile fits within the narrow sealing head frame.
Lab Dispense Valve
Toggles a precision needle dispense valve for reagent dosing, relying on the -S magnet and DMSE sensors to confirm valve seat closure for batch traceability.
Is the Airtac SE32 Standard Cylinder SE32X130S the Right Cylinder?
Selecting this 32 mm bore makes sense when your application requires roughly 402 N of push force at 0.5 MPa. If you need less power, stepping down to the 32 mm bore's nearest available smaller neighbor is not an option as it is the smallest in the range; if your load demands more thrust, stepping up to the 40 mm bore provides 628 N of push at 0.5 MPa. As a true ISO 15552 cylinder, it serves as a drop-in dimensional replacement for any standard 32 mm profile cylinder, matching the exact mounting interface and PT1/8 port layout. Note that a plain SE cylinder will drift and cannot hold a load if air pressure is lost; for position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X130S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It features a 12 mm rod, M10x1.25 rod thread, PT1/8 port, and a 27 mm cushion length.
Yes, the SE32X130S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware matching the 32 mm profile footprint, though you should verify that your porting matches the PT1/8 thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X130S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.