Airtac SE32 Standard Cylinder SE32X15S
The AirTAC Airtac SE32 Standard Cylinder SE32X15S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 15mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke15 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X15S
The AirTAC SE32X15S is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke actuation. It provides a 402 N push at 0.5 MPa alongside a 345 N pull, making it well-suited for compact clamping and ejection tasks. The 15 mm stroke is a non-standard made-to-order length, ensuring exact movement for tight machinery envelopes.
This unit features a square extruded aluminum barrel without external tie rods, allowing for flush mounting and high corrosion resistance in space-constrained setups. Equipped with a built-in magnet (S option), it supports direct mounting of AirTAC CMSE reed or DMSE electronic sensors along the three integrated sensor grooves. The field-adjustable air cushioning at both ends can be dialed in to soften end stops, even during rapid 30-800 mm/s cycles.
Airtac SE32 Standard Cylinder SE32X15S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X15S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X15S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X15S Is Used
PCB Edge Clamping
Uses the 402 N push force at 0.5 MPa to secure delicate printed circuit boards during routing, relying on the 15 mm stroke for rapid, localized grip.
Small Carton Flap Folding
Executes precise 15 mm movements to fold minor flaps on compact packaging lines, benefiting from the 30-800 mm/s speed range for high throughput.
Lab Sample Diverting
Actuates a short diverter arm in analytical equipment, where the no-tie-rod profile allows flush mounting within tight enclosures and the magnet enables DMSE position tracking.
Is the Airtac SE32 Standard Cylinder SE32X15S the Right Cylinder?
When sizing this 32 mm bore actuator, note that it is the smallest available in the SE range. If your application requires more force, stepping up to the 40 mm bore provides a 628 N push at 0.5 MPa. The SE32X15S itself delivers a 402 N push at 0.5 MPa and a maximum 82 kgf at 1.0 MPa. Because the 15 mm stroke is non-standard, expect a made-to-order lead time. For drop-in retrofits, this cylinder is dimensionally interchangeable per ISO 15552 standards, utilizing a PT1/8 port, an M10x1.25 rod thread, and standard mounting accessories. Keep in mind that a plain SE cylinder will drift if air pressure is lost; if the load must be held mechanically, consider a BSE rod lock variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X15S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides a 402 N push and a 345 N pull. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE32X15S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders with a 32 mm bore and 15 mm stroke, utilizing the same mounting hardware and PT1/8 port locations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X15S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.