Airtac SE32 Standard Cylinder SE32X200LB
The AirTAC Airtac SE32 Standard Cylinder SE32X200LB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke200 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X200LB
The AirTAC SE32X200LB is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact linear actuation. Delivering 402 N of push force at 0.5 MPa, it features a 32 mm bore and a 200 mm stroke. This variant includes an LB foot mounting bracket for secure horizontal bottom fixation, and uses a PT1/8 port.
Its square extruded aluminum barrel eliminates external tie rods, resulting in a flush, corrosion-resistant profile that simplifies machine integration. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, preventing hard mechanical impacts during high-speed cycling. This specific SKU is configured without a position-sensing magnet.
Airtac SE32 Standard Cylinder SE32X200LB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X200LB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X200LB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X200LB Is Used
Small Parts Ejection
Provides 402 N of push force to eject machined aluminum brackets from a CNC milling enclosure, utilizing the LB foot mount for stable horizontal base mounting.
Carton Flap Folding
Actuates a 200 mm stroke arm to fold corrugated cardboard flaps on a packaging line, where the adjustable cushion softens the impact at high cycling speeds.
Sorter Diverter Gate
Powers a lightweight diverter arm on a conveyor belt system, using its 345 N retract force to pull the gate back and allow standard product flow.
Is the Airtac SE32 Standard Cylinder SE32X200LB the Right Cylinder?
Selecting the SE32X200LB is optimal when your application requires around 402 N of push force at 0.5 MPa. If you need less power, the next bore down is 32 mm's smaller sibling, which is not applicable here as 32 mm is the minimum size; instead, you would step up to the 40 mm bore if greater thrust is required, which provides 628 N push at 0.5 MPa. Because this is a 200 mm stroke, it falls under the 300 mm threshold, but always ensure adequate guiding for the load. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for any comparable 32 mm bore, 200 mm stroke ISO cylinder using LB foot mounts. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X200LB FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the SE32X200LB is a standard double-acting cylinder and will drift if air pressure is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the end of the stroke; it does not function as a locking mechanism. For position holding, consider a BSE series rod lock cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X200LB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.