Airtac SE32 Standard Cylinder SE32X200SFTC
The AirTAC Airtac SE32 Standard Cylinder SE32X200SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke200 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X200SFTC
The AirTAC SE32X200S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. Delivering 402 N of push force at 0.5 MPa, it uses a 32 mm bore and 200 mm stroke to drive lightweight actuators. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts neatly against machine frames while retaining high structural rigidity.
This specific configuration includes a built-in magnet for CMSE reed and DMSE electronic position sensing, paired with an FTC front trunnion mounting accessory. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-cap deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X200SFTC Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X200SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X200SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X200SFTC Is Used
PCB Depaneling Router
Provides the 402 N push force and 200 mm stroke to plunge router bits into assembled circuit boards, using the flush profile barrel to fit densely packed electronics manufacturing cells.
Small Carton Flap Folder
Drives lightweight folding arms on packaging lines, where the FTC trunnion mount allows pivoting articulation to tuck flaps at speeds up to 800 mm/s.
Lab Sample Dispenser
Actuates a 200 mm travel nozzle for vial filling, relying on the built-in S magnet to trigger DMSE electronic sensors for precise fluid volume metering.
Is the Airtac SE32 Standard Cylinder SE32X200SFTC the Right Cylinder?
At 402 N push (0.5 MPa), this 32 mm bore is the smallest standard SE profile size, making it ideal for tight spaces. If your assembly requires more thrust, stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. Because the 200 mm stroke is substantial for this diameter, long unsupported piston travel introduces rod-bearing bending; always use an external guide to prevent side-load damage. The FTC front trunnion accessory provides a pivot point, but remember this plain cylinder drifts when air is lost—the cushion only decelerates near stroke end and does not lock the load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X200SFTC FAQ
The 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa.
Yes. The SE32X200S is dimensionally interchangeable per ISO 15552 standards, matching standardized mounting and port dimensions (PT1/8 port, M10x1.25 rod thread) for direct retrofits, though it is a profile cylinder without external tie rods.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X200SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.