Airtac SE32 Standard Cylinder SE32X210S
The AirTAC Airtac SE32 Standard Cylinder SE32X210S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke210 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X210S
The AirTAC SE32X210S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. Delivering 402 N of push force at 0.5 MPa, it features a square extruded aluminum barrel without external tie rods, making it highly corrosion-resistant and easy to mount flush against machine frames. This specific configuration includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors.
Because the 210 mm stroke exceeds the standard 1000 mm maximum for this 32 mm bore, this unit is provided as a non-standard, made-to-order configuration. It retains the core mechanics of the SE line, including field-adjustable air cushioning at both ends to soften end-stroke impacts, operating reliably at speeds between 30 and 800 mm/s.
Airtac SE32 Standard Cylinder SE32X210S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X210S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X210S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X210S Is Used
PCB Router Gantry
Drives the Z-axis plunge on a desktop PCB routing machine, using the 210 mm stroke to clear the workbed for tool changes while the compact 32 mm body saves valuable enclosure space.
Lab Sample Dispenser
Actuates a precision pipette head on an automated blood-sample dispenser, relying on the -S magnet and DMSE sensors to verify fluid draw volume at high cycle rates.
Small Carton Flap Folder
Folds the minor flaps on a small-box packaging line, where the 402 N push force at 0.5 MPa is sufficient to overcome board stiffness without crushing the carton.
Is the Airtac SE32 Standard Cylinder SE32X210S the Right Cylinder?
When sizing this 32 mm bore actuator, evaluate your exact force needs: the SE32X210S provides 402 N push at 0.5 MPa. If your load requires less force, stepping down is not an option as 32 mm is the smallest available SE bore. If you need significantly more power, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, simplifying retrofits. To match this exact unit, specify: 32 mm bore, 210 mm stroke, PT1/8 port, basic mounting, and the -S magnet option.
Because the 210 mm stroke creates a long unsupported piston rod span, side loads can induce rod-bearing bending. For optimal longevity and to prevent premature seal wear, pair this cylinder with an external guide rail to support the load and absorb lateral forces. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X210S FAQ
The SE32X210S has a 32 mm bore and a 210 mm non-standard stroke. It generates 402 N of push force and 345 N of pull force at 0.5 MPa, 563 N of push force at 0.7 MPa, and a maximum push force of 82 kgf at 1.0 MPa.
Yes, the SE32X210S shares the standardized ISO 15552 / VDMA 24562 mounting interface and dimensions, making it a direct drop-in replacement for other ISO 15552 profile cylinders. The built-in -S magnet also allows you to mount AirTAC CMSE reed or DMSE electronic sensors directly into the barrel's sensor grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X210S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.