Airtac SE32 Standard Cylinder SE32X220S
The AirTAC Airtac SE32 Standard Cylinder SE32X220S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke220 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X220S
The AirTAC SE32X220S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers a 402 N push force at 0.5 MPa alongside a 345 N pull force, utilizing a 12mm hard-chrome rod with an M10x1.25 thread. The integrated -S magnet enables direct mounting of CMSE reed and DMSE electronic position sensors along the body.
Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant profile that simplifies mounting in tight machine envelopes. The field-adjustable air cushioning at both stroke ends is a true deceleration mechanism, allowing technicians to dial out harsh end-of-stroke impacts without relying on fixed rubber bumpers.
Airtac SE32 Standard Cylinder SE32X220S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X220S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X220S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X220S Is Used
PCB Drilling Clamp
Holds fragile printed circuit boards flat during high-speed drilling, using the 402 N push force and 220 mm stroke to secure panels without cracking the substrate.
Carton Flap Folder
Folds corrugated cardboard flaps on automated packaging lines, where the compact no-tie-rod profile fits neatly between narrow conveyor guide rails.
Lab Dispenser Positioning
Moves volumetric pipetting heads across test racks, relying on the built-in magnet and DMSE electronic sensors for precise 220 mm travel confirmation.
Is the Airtac SE32 Standard Cylinder SE32X220S the Right Cylinder?
For applications needing slightly less force, the SE40 bore provides 628 N push at 0.5 MPa, while stepping down is not advised as this is the smallest standard SE bore. This 220 mm stroke falls within the 1000 mm standard limit for a 32mm bore, but long unsupported strokes invite rod-bearing bending; always use an external guide to prevent side-load damage. As a dimensionally interchangeable ISO 15552 cylinder, it drops directly into existing foot, flange, or trunnion hardware. Remember that a standard SE does not hold its load if air pressure drops; a BSE rod lock is required for fail-safe positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X220S FAQ
This 32mm bore cylinder delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It features a PT1/8 port and operates at speeds between 30-800 mm/s.
Yes, the SE32X220S is dimensionally interchangeable per ISO 15552 mounting interface dimensions, serving as a drop-in replacement for other ISO 15552 profile cylinders without needing new mounting brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X220S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.