Airtac SE32 Standard Cylinder SE32X295S
The AirTAC Airtac SE32 Standard Cylinder SE32X295S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 295mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke295 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X295S
The AirTAC SE32X295S is a double-acting single-rod ISO 15552 profile cylinder. In the 32 mm bore class, it yields 402 N of push force at 0.5 MPa and features a PT1/8 port with a 12 mm hard-chrome rod. Because the 295 mm stroke is non-standard, it is produced as a made-to-order item rather than pulled from the standard shelf.
The extruded aluminum barrel drops the external tie rods entirely, leaving smooth sides that mount flush against machine frames while resisting corrosion. A built-in magnet (-S) feeds position signals to AirTAC CMSE reed or DMSE electronic sensors, and the field-adjustable air cushioning at both ends lets you dial out hard end-stop impacts.
Airtac SE32 Standard Cylinder SE32X295S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X295S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 295 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X295S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×295 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X295S Is Used
PCB Drill Loader Gates
Cycles the safety access gate on a PCB drilling line, using the 402 N extend force and 295 mm stroke to clear the work envelope for automated tool changes.
Light Sheet Metal Straightener
Applies steady pressure to flatten thin copper or aluminum sheets in a stamping feed line, where the 345 N retract force handles the material return stroke.
Lab Sample Indexing Arm
Pushes a test tube rack between analytical stations, relying on the -S magnet and DMSE electronic sensors to confirm the full 295 mm transfer position.
Is the Airtac SE32 Standard Cylinder SE32X295S the Right Cylinder?
At 0.5 MPa, this 32 mm bore generates 402 N push and 345 N pull. If you need less force, there is no smaller standard SE bore, so you would step up to the 40 mm bore (628 N push) for heavier loads. Keep in mind a plain SE does not hold its load when air is removed or a valve centers; the piston will drift, so a BSE rod lock is required for strict position holding.
For ISO 15552 drop-in retrofits, match the 32 mm bore, 295 mm stroke, PT1/8 port, and your mounting accessory. Because the 295 mm stroke is non-standard and exceeds the 300 mm threshold, the 12 mm rod sees amplified bending moments over that length—an external guide is strongly recommended to prevent side-load wear on the rod bearing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X295S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N push and 345 N pull. At 0.7 MPa, push increases to 563 N. The maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE32X295S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and interface as other ISO 15552 profile cylinders. You can use it as a drop-in replacement without modifying the existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X295S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.