Airtac SE32 Standard Cylinder SE32X325
The AirTAC Airtac SE32 Standard Cylinder SE32X325 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke325 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X325
The AirTAC SE32X325 is a double-acting single-rod ISO 15552 profile cylinder engineered for precise linear motion. Operating at 0.5 MPa, it yields 402 N of push force and 345 N of pull force, making it well-suited for compact actuation tasks. Its extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant housing that mounts flush against machine frames.
This 32 mm bore unit spans a 325 mm stroke and relies on a PT1/8 port paired with a 12 mm rod. Because this specific SKU lacks the internal magnet suffix, it does not support CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, protecting payloads from hard impacts.
Airtac SE32 Standard Cylinder SE32X325 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X325 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X325
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X325 Is Used
PCB Drill Bit Changer
Actuates a vertical carousel gate to swap micro drill bits, utilizing the 402 N push force to reliably overcome the spring-loaded latch mechanism.
Small Parts Diverter Gate
Pushes a lightweight aluminum flap on a packaging conveyor, using the 325 mm stroke to redirect small plastic enclosures into a secondary inspection lane.
Lab Sample Tray Ejector
Extends to push standardized microtiter plates out of a centrifuge loading dock, benefiting from the smooth no-tie-rod profile that prevents dust accumulation.
Is the Airtac SE32 Standard Cylinder SE32X325 the Right Cylinder?
Selecting this 325 mm stroke model requires careful attention to rod-bearing loads; at this length the unsupported 12 mm rod is susceptible to bending under lateral stress, so an external guide rail is strongly recommended to prevent premature seal wear. If your application requires less force, stepping down is not an option as 32 mm is the smallest standard SE bore. Conversely, if you need more thrust, stepping up to the 40 mm bore provides 628 N of push at 0.5 MPa. As a true ISO 15552 profile cylinder, the SE32X325 serves as a drop-in replacement for any standard 32 mm bore, 325 mm stroke ISO cylinder, matching mounting interface dimensions exactly without relying on specific brand footprints. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load in place if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X325 FAQ
At 0.5 MPa, the SE32X325 provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This specific SE32X325 SKU does not include a built-in magnet, meaning it cannot support AirTAC CMSE or DMSE position sensors. However, the extruded profile body features sensor grooves on three sides, so if you order the -S magnet variant, sensors can be dropped in without extra brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X325
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.