Airtac SE32 Standard Cylinder SE32X400SCB
The AirTAC Airtac SE32 Standard Cylinder SE32X400SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke400 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X400SCB
The AirTAC SE32X400SCB is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a push force of 402 N at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that resists corrosion and mounts flush against machine frames. A built-in magnet enables position detection with CMSE or DMSE sensors.
This 32 mm bore unit features a PT1/8 port and a 12 mm hard-chrome rod. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, preventing harsh impacts when cycling at speeds up to 800 mm/s. The CB double clevis mount provides pivoting articulation for angular load actuation.
Airtac SE32 Standard Cylinder SE32X400SCB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X400SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X400SCB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X400SCB Is Used
Sorter Diverter Arm
Uses the 400 mm stroke and CB clevis to pivot packages across a sorting belt, relying on the 402 N push force to overcome friction.
Film Roll Tensioner
Maintains tension on packaging film webs with smooth pneumatic give, using the adjustable cushion to soften retraction at high cycle rates.
Lab Sample Ejector
Pushes prepared specimens out of a testing bay, using the -S magnet and DMSE sensors to confirm ejection before the door opens.
Is the Airtac SE32 Standard Cylinder SE32X400SCB the Right Cylinder?
This 32 mm bore generates 402 N of push at 0.5 MPa. If your application requires less force, you must drop down to a smaller non-ISO bore, but if you need to step up, the neighbouring 40 mm bore provides 628 N of push at 0.5 MPa. Because the stroke is 400 mm, the 12 mm rod needs external guide support to prevent rod-bearing bending under side loads. The CB eye mount accommodates pivoting loads, but a plain SE cylinder will drift if air pressure is lost—it cannot hold a load without live pressure or an external rod lock. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement sharing standard mounting hardware and port sizes.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X400SCB FAQ
At 0.5 MPa it provides 402 N push and 345 N pull. At 0.7 MPa the push is 563 N, with a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushion only decelerates the piston near stroke end and does not act as a brake. The cylinder will drift if air is lost or the valve is centered; you would need a BSE rod lock variant for secure holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X400SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.