Airtac SE32 Standard Cylinder SE32X400SG
The AirTAC Airtac SE32 Standard Cylinder SE32X400SG is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke400 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X400SG
The AirTAC SE32X400SG is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It yields 402 N of push force at 0.5 MPa and features a G1/8 port. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting in tight machine envelopes.
This 32 mm bore unit travels 400 mm and includes a built-in magnet (-S) for direct CMSE reed or DMSE electronic position sensing. Field-adjustable air cushions at both ends let you tune end-of-stroke deceleration to prevent hard mechanical impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X400SG Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X400SG |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X400SG
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X400SG Is Used
PCB Depaneling Router
Drives a light-load routing head across 400 mm to singulate assembled circuit boards, using the 402 N push force to maintain smooth, chatter-free linear travel.
Package Sorting Diverter
Actuates a lightweight paddle arm on a packaging conveyor, where the compact 32 mm profile and built-in DMSE sensor magnet allow precise positioning in tight transfer chutes.
Lab Sample Dispenser
Strokes 400 mm to move a pipetting gantry over a multi-well tray, relying on adjustable end cushions to soften stops and prevent liquid splashing during high-speed reversals.
Is the Airtac SE32 Standard Cylinder SE32X400SG the Right Cylinder?
If your application requires less force, the SE40 bore is the next size up, providing 628 N push at 0.5 MPa; there is no smaller standard SE bore below 32 mm. Because this is a plain double-acting cylinder, it will drift if air pressure is lost and cannot hold a load unpowered—use a BSE rod lock for failsafe holding. For this 400 mm stroke, the unsupported piston rod is prone to bending under lateral stress, so an external guide is strongly recommended to prevent side-load bearing wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders. Specify the 32 mm bore, 400 mm stroke, G1/8 port thread, and your required mounting accessory to ensure a seamless retrofit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X400SG FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE32X400SG is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders. It uses a G1/8 BSPP port thread and includes a built-in magnet compatible with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X400SG
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.