Airtac SE32 Standard Cylinder SE32X475
The AirTAC Airtac SE32 Standard Cylinder SE32X475 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke475 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X475
The AirTAC SE32X475 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It yields 402 N of push force at 0.5 MPa and utilizes a PT1/8 port. Because this SKU lacks the -S magnet suffix, it is not prepped for CMSE or DMSE position sensing out of the box.
Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine envelopes. The field-adjustable air cushioning at both ends lets technicians dial in end-of-stroke deceleration via a screw, softening hard mechanical stops during high-speed 30-800 mm/s cycles.
Airtac SE32 Standard Cylinder SE32X475 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X475 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X475
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X475 Is Used
PCB Drill Spindle Loader
Cycles a 402 N push at 0.5 MPa to shuttle lightweight drill spindles, using the adjustable end cushions to soften impact during 30-800 mm/s rapid positioning.
Lab Sample Dispenser
Moves fluid vials along a 475 mm path where the tie-rod-free extruded barrel prevents dust buildup and allows flush mounting to stainless steel lab frames.
Carton Flap Folder
Folds lightweight cardboard flaps synchronously, relying on the ISO 15552 mounting interface for rapid retrofitting into existing packaging conveyors.
Is the Airtac SE32 Standard Cylinder SE32X475 the Right Cylinder?
Generating 402 N push at 0.5 MPa, this 32 mm bore fits light-duty tasks; if you need less force, there is no smaller standard SE bore, but if your load increases, stepping up to the 40 mm bore yields 628 N push. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure drops—consider a BSE rod lock variant for fail-safe positioning.
At 475 mm of stroke, the 12 mm rod and M10x1.25 thread face bending stresses under side loads; an external guide rail is recommended to prevent premature rod-bearing wear. As a dimensionally interchangeable ISO 15552 unit, it serves as a drop-in replacement sharing standard mounting accessories, PT1/8 ports, and a 27 mm cushion length.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X475 FAQ
At 0.5 MPa, the SE32X475 provides 402 N push and 345 N pull force. At 0.7 MPa, push increases to 563 N, with a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No. The field-adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a locking mechanism. If the air supply is lost, the piston will drift. Use a BSE rod lock cylinder or external check valve for fail-safe load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X475
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.