Airtac SE32 Standard Cylinder SE32X475S
The AirTAC Airtac SE32 Standard Cylinder SE32X475S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke475 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X475S
The AirTAC SE32X475S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers a 402 N push at 0.5 MPa and utilizes a square extruded aluminum barrel that omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable pneumatic cushioning at both ends allows you to dial out harsh end-stops during high-speed cycling, while the 475 mm stroke provides ample extension for automated machinery.
Airtac SE32 Standard Cylinder SE32X475S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X475S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X475S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X475S Is Used
PCB Conveyor Diverting
Uses the 402 N push and 475 mm stroke to actuate routing gates on electronics assembly lines, where the compact profile barrel fits neatly within tight conveyor frames.
Carton Flap Folding
Extends to fold corrugated box flaps at 30-800 mm/s, leveraging the adjustable end cushions to soften impact and prevent crushing lightweight packaging materials.
Lab Sample Dispensing
Drives a linear transfer head for test-tube racks, utilizing the built-in S magnet with DMSE electronic sensors for accurate position feedback in diagnostic equipment.
Is the Airtac SE32 Standard Cylinder SE32X475S the Right Cylinder?
If your application requires less extension or force, the neighboring 25 mm bore class offers a smaller footprint, while stepping up to the 40 mm bore yields a higher 628 N push at 0.5 MPa for heavier workloads. Because the 475 mm stroke creates a long lever arm on the 12 mm rod, external guide rails should be used to prevent side-load bending at the rod bearing.
For ISO 15552 dimensional interchangeability, match the 32 mm bore, 475 mm stroke, PT1/8 port, and your required mounting accessory. Note that this cylinder drifts when air is removed; if you need to hold a load without live pressure, consider the BSE rod-lock variant instead of relying on the adjustable air cushion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X475S FAQ
The SE32X475S generates a push force of 402 N at 0.5 MPa and 563 N at 0.7 MPa, with a pull force of 345 N at 0.5 MPa. Its maximum push force is 82 kgf at 1.0 MPa operating pressure.
Yes, the SE32X475S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it in to replace other ISO 15552 profile cylinders using the existing mounting hardware and PT1/8 port interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X475S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.