Airtac SE32 Standard Cylinder SE32X5
The AirTAC Airtac SE32 Standard Cylinder SE32X5 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 5mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke5 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X5
The AirTAC SE32X5 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact actuation. Delivering 402 N of push force at 0.5 MPa and a maximum of 82 kgf at 1.0 MPa, it fits precise short-stroke tasks. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant exterior that mounts cleanly in tight spaces.
Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, protecting internal components during rapid 30-800 mm/s cycles. This specific SKU lacks the built-in magnet, so it operates without electronic or reed position feedback.
Airtac SE32 Standard Cylinder SE32X5 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X5 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X5
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X5 Is Used
Valve Gate Positioning
Provides 402 N of push at 0.5 MPa to actuate small fluid control valves in bottling lines, utilizing the 5 mm stroke for rapid, precise flow interception.
Lab Test Fixture Clamping
Secures delicate material samples during tensile testing, where the compact tie-rod-free profile prevents interference with optical measurement gear.
PCB Ejector Mechanism
Exerts short-stroke ejection force on printed circuit boards from pick-and-place machinery, relying on adjustable end cushions to protect delicate traces.
Is the Airtac SE32 Standard Cylinder SE32X5 the Right Cylinder?
At 0.5 MPa, this 32 mm bore generates 402 N of push force. If your assembly requires less clamping authority, the adjacent smaller bore is unavailable in this ISO series, making this the entry point. If you need substantially more thrust, stepping up to the 40 mm bore yields 628 N push at 0.5 MPa. Because this is a plain double-acting cylinder, it cannot hold a load if air pressure drops—the piston drifts; use a BSE rod lock for fail-safe holding. As a true ISO 15552 profile cylinder, it drops into existing standardized mounting hardware without modification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X5 FAQ
The SE32X5 delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. It features a PT1/8 port and a 12 mm rod.
It is dimensionally interchangeable with any ISO 15552 cylinder for drop-in retrofitting. However, it is a standard double-acting cylinder; the adjustable cushion only decelerates the piston near stroke end and does not lock or hold the load when air is removed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.