Airtac SE32 Standard Cylinder SE32X50SFTC
The AirTAC Airtac SE32 Standard Cylinder SE32X50SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X50SFTC
The AirTAC SE32X50SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. Operating at 0.15-1.0 MPa, it delivers 402 N of push force and 345 N of pull force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, providing a smooth, corrosion-resistant body that mounts flush against machine frames, while the integrated FTC center trunnion bracket allows flexible pivot mounting.
This 32 mm bore unit includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position sensors. Unlike fixed rubber bumpers, its integrated pneumatic cushioning at both ends is field-adjustable via a set screw, allowing you to tune end-of-stroke deceleration and minimize hard impact noise across its 30-800 mm/s speed range.
Airtac SE32 Standard Cylinder SE32X50SFTC Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X50SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X50SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X50SFTC Is Used
PCB Depaneling Saw
Provides the precise 50 mm stroke and 402 N push required to clamp small electronic panels securely during automated routing saw separation.
Pouch Sealing Jaws
Actuates the small 32 mm bore sealing jaws on continuous flow packaging equipment, utilizing the adjustable cushion to soften the 50 mm end stop.
Lab Dispenser Positioning
Drives a 50 mm reagent dispensing head in analytical instruments, using the -S magnet with DMSE sensors to confirm liquid delivery depth.
Is the Airtac SE32 Standard Cylinder SE32X50SFTC the Right Cylinder?
Generating 402 N of push at 0.5 MPa, this 32 mm bore cylinder is the smallest in the SE lineup; if your application requires less force, you must step outside the ISO 15552 series, but if you need more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Because the FTC trunnion mount allows pivoting, remember that a plain double-acting cylinder cannot hold a load if air pressure is lost or the valve is centered—the piston will drift. For secure position holding, pair this unit with an external pilot-operated check valve or explore the BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X50SFTC FAQ
At 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It features a PT1/8 port, a 12 mm rod diameter, and an M10x1.25 rod-end thread.
Yes, the SE32X50SFTC is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint of other ISO 15552 profile cylinders. The FTC designation indicates an integrated center trunnion mounting style, allowing the cylinder body to pivot freely around its midpoint to accommodate lateral movement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X50SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.