Airtac SE32 Standard Cylinder SE32X50SH
The AirTAC Airtac SE32 Standard Cylinder SE32X50SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X50SH
The AirTAC SE32X50SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a push force of 402 N and a pull force of 345 N at 0.5 MPa. Equipped with a Viton (FKM) seal, this unit withstands elevated temperatures up to 150 C, making it ideal for hot-end manufacturing cells.
Its square extruded aluminum barrel eliminates external tie rods, resulting in a compact, corrosion-resistant profile that mounts flush within tight machine envelopes. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection.
Airtac SE32 Standard Cylinder SE32X50SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X50SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X50SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X50SH Is Used
Injection Mold Ejection
Provides 402 N of push at 0.5 MPa to eject small plastic parts from hot mold halves, leveraging the Viton seal to resist ambient radiant heat up to 150 C.
High-Temp Diverting
Actuates guide rails on a packaging line to divert heated molded components, relying on the 50 mm stroke and CMSE/DMSE sensor magnet for rapid positioning.
Lab Oven Door Latch
Secures access doors on small laboratory curing ovens, where the FKM seal survives continuous high-temperature duty and the compact tie-rod-free barrel saves space.
Is the Airtac SE32 Standard Cylinder SE32X50SH the Right Cylinder?
If your assembly requires less push, stepping down is not an option as 32 mm is the smallest standard SE bore. If you need greater thrust, stepping up to the 40 mm bore yields a 628 N push at 0.5 MPa. Because this is a double-acting cylinder, it will drift and cannot hold a load if air pressure is lost or the valve is centered; integrate an external rod lock or pilot-operated check valve for safety-critical holding. As a dimensionally interchangeable ISO 15552 component, it serves as a direct drop-in replacement for other ISO 15552 cylinders sharing the 50 mm stroke, PT1/8 port, and standard mounting footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X50SH FAQ
The SE32X50SH generates a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push of 82 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE32X50SH is dimensionally interchangeable per ISO 15552 standards, allowing it to drop in for other ISO 15552 cylinders using the same 32 mm bore and 50 mm stroke. It features field-adjustable air cushioning at both ends to decelerate the piston near stroke end, though it is not a locking device.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X50SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.