Airtac SE32 Standard Cylinder SE32X60S
The AirTAC Airtac SE32 Standard Cylinder SE32X60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke60 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X60S
The AirTAC SE32X60S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatic motion. Delivering 402 N of push force at 0.5 MPa, it suits light-duty positioning and ejection tasks. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant profile that mounts flush against machine frames while protecting internal seals from snagging.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, preventing harsh impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X60S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X60S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X60S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X60S Is Used
PCB Ejection
Provides 402 N of push force to eject populated printed circuit boards from test fixtures, utilizing the 60 mm stroke for rapid, compact retraction.
Flap Folding
Drives small cardboard flap folders on packaging lines, where the magnetic piston triggers DMSE sensors to confirm the fold cycle.
Component Sorting
Actuates diverter gates in vibratory bowl feeders to route small electronic components into correct bins based on sensor feedback.
Is the Airtac SE32 Standard Cylinder SE32X60S the Right Cylinder?
For applications needing less force, the adjacent SE25 bore is unavailable in this series, making the 32mm the baseline option; conversely, stepping up to the SE40X60S provides 628 N of push at 0.5 MPa for heavier resistance. Because this is a double-acting cylinder, it relies on continuous air pressure to hold position and will drift if supply is lost. The standardized ISO 15552 mounting interface ensures a drop-in retrofit for equivalent profile cylinders, utilizing the PT1/8 port and M10x1.25 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X60S FAQ
At 0.5 MPa, the SE32X60S delivers 402 N push and 345 N pull force. At 0.7 MPa, push increases to 563 N, with an absolute maximum push of 82 kgf at 1.0 MPa. The maximum standard stroke available for the 32 mm bore is 1000 mm.
Yes, the SE32X60S is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a drop-in replacement for other profile cylinders using standard mounting accessories. The built-in magnet is compatible with AirTAC CMSE and DMSE sensor rails.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.