Airtac SE32 Standard Cylinder SE32X75FTC
The AirTAC Airtac SE32 Standard Cylinder SE32X75FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X75FTC
The AirTAC SE32X75FTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. It generates 402 N of push force and 345 N of pull force at 0.5 MPa, utilizing a 12 mm rod and a PT1/8 port. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
This unit includes an FTC center trunnion mounting interface and field-adjustable air cushioning at both ends to soften end-stop impact. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensing out of the box.
Airtac SE32 Standard Cylinder SE32X75FTC Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X75FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X75FTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X75FTC Is Used
PCB Handling Gates
Actuates routing gates on PCB conveyor lines where 402 N of push force reliably redirects light fiberglass panels without overstressing the assembly.
Carton Flap Folding
Drives the mechanical arms that fold minor flaps on small carton sealers, benefiting from the FTC pivot to maintain rod alignment during the sweep.
Lab Dispenser Positioning
Indexes reagent tray carousels in clinical analyzers, utilizing the smooth tie-rod-free extruded profile to prevent dust accumulation and ease washdown.
Is the Airtac SE32 Standard Cylinder SE32X75FTC the Right Cylinder?
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force. If your assembly requires less force, you can step down to the 25 mm bore (offering 246 N push), or step up to the 40 mm bore (providing 628 N push) for heavier actuation. Because the FTC mount allows pivoting, ensure the rod end is guided to prevent side-load binding.
This SE32X75FTC is dimensionally interchangeable per ISO 15552, meaning it serves as a direct drop-in replacement for other ISO 15552 cylinders with identical 32 mm bore, 75 mm stroke, PT1/8 port, and FTC mounting configurations. Remember, a standard double-acting cylinder drifts when air is lost; if you need static position holding, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X75FTC FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X75FTC is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders with a 32 mm bore, 75 mm stroke, and FTC mounting interface. Note that this SKU lacks a sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X75FTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.