Airtac SE32 Standard Cylinder SE32X950
The AirTAC Airtac SE32 Standard Cylinder SE32X950 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke950 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X950
The AirTAC SE32X950 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a non-standard 950 mm stroke. Delivering 402 N of push force at 0.5 MPa, it utilizes a 12 mm piston rod and an M10x1.25 rod-end thread. Because the stroke exceeds the standard 1000 mm limit for this 32 mm bore, it is produced as a made-to-order unit.
This extruded aluminum body omits external tie rods, yielding a compact, corrosion-resistant footprint that mounts flush against machine frames. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts at high cycling speeds. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
Airtac SE32 Standard Cylinder SE32X950 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X950 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X950
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X950 Is Used
Packaging Line Diverter
Pushes light cartons between parallel conveyor belts over a long 950 mm span, utilizing the 402 N extend force to reliably shift products without overwhelming fragile packaging.
Laboratory Sample Shuttle
Transports test tubes between analysis stations, where the compact tie-rod-free profile cylinder body resists corrosion in humid lab environments and fits into tight machine cells.
Light-Duty Storage Extractor
Extracts small plastic bins from deep shelving racks, relying on the adjustable air cushion to gently decelerate the 950 mm stroke and prevent jarring impacts at the end of travel.
Is the Airtac SE32 Standard Cylinder SE32X950 the Right Cylinder?
Stepping down from this 32 mm bore is not an option as it is the smallest ISO 15552 size, but moving up to a 40 mm bore increases the 0.5 MPa push force to 628 N if your payload demands more authority. Conversely, if your application requires holding a vertical load without live air pressure, a plain SE cylinder will drift and you must pivot to the BSE rod-lock variant. Because this unit spans 950 mm, the 12 mm rod is highly susceptible to bending under side loads; always pair this length with an external linear guide to protect the rod bearing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X950 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at the 1.0 MPa operating pressure limit.
Yes, the SE32X950 shares the exact ISO 15552 / VDMA 24562 mounting interface, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders. It uses a PT1/8 port and requires standard ISO mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X950
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.