Airtac SE80 Standard Cylinder SE80AX175S
The AirTAC Airtac SE80 Standard Cylinder SE80AX175S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX175S
The AirTAC SE80AX175S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a 25 mm rod with an M20x1.5 thread. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from washdown environments.
Equipped with a SUS420J2 stainless steel rod (code A) and a built-in magnet (code S), this unit is purpose-built for harsh duty. The magnet directly interfaces with AirTAC CMSE reed and DMSE electronic sensors along the three integrated side grooves for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows you to tune the deceleration via a set screw, softening hard end stops during high-speed 30-800 mm/s operations.
Airtac SE80 Standard Cylinder SE80AX175S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX175S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX175S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX175S Is Used
Palletizer Case Pusher
Drives heavy corrugated cases onto pallets using 2513 N push at 0.5 MPa, relying on the SUS420J2 rod to withstand humid washdown packing lines.
Metal Stamping Ejector
Kicks stamped metal sheets out of a 175 mm die cavity, using the field-adjustable cushion to soften end-of-stroke impacts at high speeds.
Food Mixer Lid Lift
Raises heavy mixer lids on a processing line, utilizing the corrosion-resistant stainless rod and DMSE electronic sensors for hygienic, repeatable positioning.
Is the Airtac SE80 Standard Cylinder SE80AX175S the Right Cylinder?
If your application requires less force, the 63 mm bore neighbor provides 1559 N push at 0.5 MPa, whereas stepping up to the 100 mm bore yields 3927 N. This SE80AX175S features a 175 mm stroke and a PT3/8 port. Because it is a standard double-acting cylinder, it will drift if air pressure is lost or the valve is centered; for absolute load holding, consider the BSE rod lock variant. At 175 mm, side loading is minimal, but always verify rod-bearing bending limits if guiding heavy offset loads.
As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, sharing standardized mounting dimensions and hardware. To complete your retrofit, match the 80 mm bore, 175 mm stroke, PT3/8 port, your chosen mounting accessory, and the -S magnet for CMSE/DMSE sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX175S FAQ
The SE80AX175S has an 80 mm bore and a PT3/8 port. It generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using existing mounting hardware, while the built-in -S magnet supports AirTAC CMSE and DMSE position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.