Airtac SE80 Standard Cylinder SE80AX180S
The AirTAC Airtac SE80 Standard Cylinder SE80AX180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke180 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX180S
The AirTAC SE80AX180S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty actuation. It delivers a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa) over a 180 mm stroke, driven through a PT3/8 port. The SUS420J2 stainless steel rod (code A) provides superior corrosion resistance, making the unit highly suitable for washdown environments or applications where moisture and chemicals would degrade a standard carbon steel rod.
Unlike traditional tie-rod bodies, its square extruded aluminum barrel omits external protruding rods, yielding a compact footprint that mounts flush against machine frames while retaining full ISO 15552 dimensional interchangeability. The integrated magnet (code S) enables seamless positioning feedback when paired with AirTAC CMSE reed or DMSE electronic sensors along the triple-sided sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts at high cycling speeds.
Airtac SE80 Standard Cylinder SE80AX180S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX180S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX180S Is Used
Press Brake Die Lifting
Raises and lowers heavy lower press brake dies using 2513 N of thrust at 0.5 MPa, relying on the SUS420J2 rod to withstand occasional coolant spray in the metalforming shop.
Bottle Conveyor Diversion
Actuates a high-speed lane diverter arm across a 180 mm stroke on a beverage bottling line, using the integrated magnet with DMSE sensors to confirm gate positioning.
Corrugated Box Flap Folding
Drives a mechanical folding arm to tuck heavy corrugated flaps on a carton erector, utilizing the adjustable end cushions to prevent jarring impacts at 800 mm/s.
Is the Airtac SE80 Standard Cylinder SE80AX180S the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your process demands substantial thrust, specifically 2513 N of push at 0.5 MPa. If your load requirements are lighter, stepping down to the 63 mm bore drops the output to 1559 N push, whereas scaling up to the 100 mm bore increases it to 3927 N. Because this is a 180 mm stroke, side-load stress on the M20x1.5 rod thread and bearing remains moderate, but any unsupported heavy load should still utilize an external guide rail to prevent premature seal wear.
For retrofits, this model is dimensionally interchangeable with any standard ISO 15552 cylinder, matching the 80 mm bore, 180 mm stroke, PT3/8 port, and standard mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If air pressure is lost or the valve is centered, the rod will drift. For positive position holding without live air, you must integrate an external pilot-operated check valve or transition to the AirTAC BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX180S FAQ
The 80 mm bore provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80AX180S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other 80 mm bore, 180 mm stroke profile cylinders using the same mounting hardware and PT3/8 port locations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX180S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.