Airtac SE80 Standard Cylinder SE80AX220S
The AirTAC Airtac SE80 Standard Cylinder SE80AX220S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 220mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke220 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX220S
The AirTAC SE80AX220S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N push force at 0.5 MPa and utilizes an 80 mm bore with a 220 mm stroke. The barrel is a square extruded aluminum profile without external tie rods, creating a smooth, compact body that resists corrosion and mounts flush against machine frames.
This specific configuration includes a SUS420J2 stainless steel rod (material code A) for superior resistance to moisture and washdown chemicals. The built-in magnet (code S) enables direct mounting of CMSE reed or DMSE electronic sensors along the three integrated side grooves. Field-adjustable pneumatic cushioning at both ends allows precise tuning of end-stop deceleration to absorb kinetic energy at high cycle rates.
Airtac SE80 Standard Cylinder SE80AX220S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX220S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX220S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX220S Is Used
Palletizer Case Pusher
Drives sealed cartons onto shipping pallets using 2513 N of push force, relying on the SUS420J2 rod to endure humid washdown environments between shifts.
Injection Mold Ejector
Strikes formed plastic parts from heavy tooling, using the field-adjustable cushion to soften end-stops during rapid 30-800 mm/s extraction cycles.
Heavy Parts Diverter
Routes dense metal castings on a transfer line, where the built-in S magnet pairs with DMSE sensors to confirm diverter position.
Is the Airtac SE80 Standard Cylinder SE80AX220S the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your force requirements against neighboring ISO 15552 options. Stepping down to a 63 mm bore reduces the 0.5 MPa push to 1559 N, while moving up to a 100 mm bore increases it to 3927 N. The 220 mm stroke on this model exceeds the 300 mm threshold where side-load risks elevate; for heavy offset loads, pair the M20x1.5 rod-end thread with an external guide to prevent rod-bearing bending. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for equivalent bore and stroke cylinders, utilizing the PT3/8 port and standard mounting hardware. Note that a plain SE cylinder relies on live air pressure to hold position; if power fails, the piston drifts, requiring a BSE rod lock for secure load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX220S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force increases to 3518 N. The maximum allowable push force is 513 kgf at 1.0 MPa.
Yes, the SE80AX220S is dimensionally interchangeable with other ISO 15552 profile cylinders, matching the 80 mm bore, 220 mm stroke, PT3/8 port, and standard mounting interface for seamless retrofits.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX220S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.