Airtac SE80 Standard Cylinder SE80AX5
The AirTAC Airtac SE80 Standard Cylinder SE80AX5 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 5mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke5 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX5
The AirTAC SE80AX5 is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke, high-force tasks. It generates 2513 N of push force at 0.5 MPa and utilizes a robust Ø25 mm piston rod. Equipped with a SUS420J2 stainless steel rod (option A), it is purpose-built for corrosive environments and washdown duty.
This extruded aluminum body omits external tie rods, yielding a compact footprint that mounts flush against machine frames. The field-adjustable air cushion at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts even during rapid 30-800 mm/s cycles. Note that this specific SKU lacks a position-sensing magnet, so it operates without CMSE or DMSE electronic switches.
Airtac SE80 Standard Cylinder SE80AX5 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX5 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX5
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX5 Is Used
Stamping Press Ejection
Uses the 2513 N push force to knock stamped metal parts out of a die in a single 5 mm stroke, relying on the SUS420J2 rod to withstand residual cutting fluid spray.
Carton Flap Folding
Delivers a fast, short 5 mm punch to fold heavy cardboard carton flaps on a high-speed packaging line, operating reliably at up to 800 mm/s.
Bottling Line Diverter
Actuates a short-stroke diverter gate to route glass bottles on a washdown conveyor, where the stainless steel rod prevents corrosion from chemical cleaning agents.
Is the Airtac SE80 Standard Cylinder SE80AX5 the Right Cylinder?
Selecting this 80 mm bore makes sense when substantial thrust is needed in a tight 5 mm stroke. If your application requires less force, stepping down to the 63 mm bore yields 1559 N of push at 0.5 MPa. Conversely, escalating to the 100 mm bore provides 3927 N of push at 0.5 MPa for heavier loads. Because the stroke is only 5 mm, side-load stress on the rod bearing is negligible, negating the need for external guide rails.
As a dimensionally interchangeable ISO 15552 component, it serves as a direct drop-in replacement for other ISO 15552 cylinders, matching the PT3/8 port and M20x1.5 rod thread. Remember that a standard double-acting cylinder drifts when air pressure is lost; if your process demands strict load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX5 FAQ
At 0.5 MPa, the SE80AX5 provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The absolute maximum push capacity is 513 kgf when operated at the 1.0 MPa pressure limit.
This specific SKU does not include a built-in magnet, so it cannot support AirTAC CMSE reed or DMSE electronic sensors. However, it features a field-adjustable air cushion at both ends that allows you to tune the screw to decelerate the piston near the stroke ends, preventing hard end-stop impacts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.