Airtac SE80 Standard Cylinder SE80BX100
The AirTAC Airtac SE80 Standard Cylinder SE80BX100 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX100
The AirTAC SE80BX100 is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding industrial environments. It generates 2513 N of push force at 0.5 MPa and 3518 N at 0.7 MPa, making it well-suited for heavy actuation. The extruded aluminum barrel lacks external tie rods, yielding a compact, flush-mounting footprint that resists corrosion and simplifies bracket installation.
This specific SKU features a SUS304 stainless steel piston rod (code B) designed for washdown and corrosive-duty applications. Because it lacks the -S magnet code, it is not pre-configured for AirTAC CMSE or DMSE position sensing out of the box. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed operation.
Airtac SE80 Standard Cylinder SE80BX100 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX100 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX100
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX100 Is Used
Palletizer Case Pusher
Provides the 2513 N push force at 0.5 MPa needed to index heavy corrugated cardboard cases onto a palletizer lane, with the SUS304 rod enduring humid packing plant environments.
CNC Fixture Clamp
Secures heavy cast iron engine blocks during machining, utilizing the 80mm bore's 3518 N thrust at 0.7 MPa to prevent workpiece deflection under high cutting loads.
Washdown Diverter
Actuates routing gates in food and beverage processing lines, where the SUS304 stainless rod resists chemical washdowns and the tie-rod-free profile prevents debris accumulation.
Is the Airtac SE80 Standard Cylinder SE80BX100 the Right Cylinder?
If 2513 N push at 0.5 MPa is too much force, stepping down to the 63mm bore yields 1559 N. If your application requires more thrust, the 100mm bore provides 3927 N at the same pressure. Keep in mind that a standard SE cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; for positive holding, explore the BSE rod-lock variant. Since this unit uses a PT3/8 port and standard 100mm stroke, it serves as a drop-in dimensional replacement for any ISO 15552 cylinder utilizing the same mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX100 FAQ
The SE80BX100 delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It features an 80mm bore, a PT3/8 port, and a 25mm rod.
This specific SKU does not include the -S magnet code, so it is not equipped out-of-the-box for CMSE reed or DMSE electronic sensors. If position feedback is required, you would need a variant with the built-in magnet option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.