Airtac SE80 Standard Cylinder SE80BX600SH
The AirTAC Airtac SE80 Standard Cylinder SE80BX600SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX600SH
The AirTAC SE80BX600SH is a double-acting single-rod profile cylinder built to ISO 15552 / VDMA 24562 dimensional standards. It delivers a robust 2513 N push force at 0.5 MPa, utilizing a 25 mm SUS304 stainless steel rod and a PT3/8 port. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush on machinery while surviving harsh washdown environments.
Equipped with a Viton (FKM) seal, this unit operates reliably across an extended temperature range of 0 to 150 degrees Celsius. The integrated -S magnet interfaces directly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows you to tune deceleration and soften hard end stops during high-speed 600 mm strokes.
Airtac SE80 Standard Cylinder SE80BX600SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX600SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX600SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX600SH Is Used
Bottling Line Diverter
Routes heavy pallets on a beverage line using 2513 N of push force, while the SUS304 rod and FKM seal withstand daily chemical washdowns at high temperatures.
Injection Mold Ejector
Drives a 600 mm stroke to clear large automotive dashboards from molds, relying on adjustable pneumatic cushioning to protect the 25 mm rod from hard end-stop impacts.
Pallet Stacker Gate
Actuates a heavy loading-dock gate where the -S magnet triggers DMSE electronic sensors, confirming full extension despite dusty ambient conditions.
Is the Airtac SE80 Standard Cylinder SE80BX600SH the Right Cylinder?
Selecting this 80 mm bore makes sense when 50 mm (982 N push @0.5 MPa) lacks thrust but stepping up to 100 mm (3927 N push @0.5 MPa) would be physically oversized. Because the 600 mm stroke generates significant leverage, the 25 mm rod and M20x1.5 thread endure substantial bending loads; an external guide is strongly recommended to prevent premature rod-bearing wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement matching the 80 mm bore, 600 mm stroke, PT3/8 port, and standard mounting accessories.
Remember that a plain SE cylinder does not hold its load when air is exhausted or the valve is centered, as the piston will drift. The adjustable cushion only decelerates the piston near stroke end rather than locking it. If your application requires mid-stroke position holding under lost pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX600SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at speeds from 30 to 800 mm/s.
Yes, the SE80BX600SH is dimensionally interchangeable per ISO 15552 standards, serving as a drop-in replacement for other profile cylinders with an 80 mm bore, 600 mm stroke, and PT3/8 port. The integrated -S magnet also works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX600SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.