Airtac SE80 Standard Cylinder SE80BX75S
The AirTAC Airtac SE80 Standard Cylinder SE80BX75S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke75 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX75S
The AirTAC SE80BX75S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. It features an extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a SUS304 stainless steel rod for corrosive and washdown environments, plus a built-in magnet for CMSE and DMSE position sensing. The field-adjustable air cushion at both ends allows you to tune end-of-stroke deceleration precisely, protecting payloads from hard mechanical impacts.
Airtac SE80 Standard Cylinder SE80BX75S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX75S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX75S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX75S Is Used
Palletizer Case Pusher
Uses the 2513 N extend force to positively push heavy cardboard cases onto pallets in high-speed packaging lines without stalling.
Press Brake Bender
Provides steady clamping pressure for sheet metal bending operations, where the SUS304 rod resists coolant washdown.
Bottle Divert Gate
Actuates a routing gate on a conveyor system, using the built-in magnet to trigger DMSE sensors for timing control.
Is the Airtac SE80 Standard Cylinder SE80BX75S the Right Cylinder?
Generating 2513 N of push force at 0.5 MPa, this 80 mm bore is a heavy-duty actuator. If your application requires less force, stepping down to a 63 mm bore yields 1559 N push, while moving up to a 100 mm bore provides 3927 N. Remember that a standard SE cylinder will drift if air pressure is lost; if your machine requires absolute position holding, consider the BSE rod-lock variant.
Because it shares the exact ISO 15552 mounting interface, this cylinder serves as a drop-in dimensional replacement for other ISO 15552 profile cylinders, utilizing existing mounting hardware. It uses a PT3/8 port, a 25 mm rod with an M20x1.5 thread, and the -S magnet enables solid-state or reed switch integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX75S FAQ
At 0.5 MPa, the 80 mm bore provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, and the maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80BX75S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and can serve as a drop-in replacement for other ISO 15552 profile cylinders using standard mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.